Change Currency: USD

MIRROR MOUNT REAR VIEW BACKUP CAMERA SYSTEM WITH LICENSE CAMERA

$94.99 $49.99

This product is currently out of stock

Product Information

BRAND NEW VEHICLE REAR VIEW BACKUP SYSTEM -  COLOR LICENSE MOUNT INFRARED CAMERA WITH 3.8" TFT LCD REAR VIEW MIRROR MOUNT MONITOR!!!

The TFT LCD Rear View Mirror Monitor Has Both Front Panel Menu And Wireless Remote Control! Up to TWO Cameras Can Be Viewed On The 3.8" Digital Video Monitor Within The Mirror! Also Works With Our Many Other Addtional Rear View Cameras!

Added Bonus!!!  

Free 32' Cable to connect the monitor to the camera.  Normally sold separately, this MSRP's for $30.  You don't have to shop elsewhere!!!  We're giving it to you for free as thanks for purchasing the camera/monitor set.  Depending upon your needs we also sell a longer 49' cable at additional $10 

You'll Get A Complete Rear View Backup System With All Accessories 

    • One COLOR Weather/Water-Proof Wide Angle License Mount Rear View Camera With Wide View Angle, Video, and Night Vision.  Approx. 9.8" width x 1.2" height x 0.6" length (size includes license-mount attachment).  
    • One (1) NEW Rear View Mirror 3.8" Digital COLOR Monitor, with Front Panel On-Screen Menu
    • One (1) Wireless Remote Controller
    • All the necessary cable hookups for monitor installation and right out-of-the-box use.
    • ANOTHER FREE BONUS!!! - 32' or 49' cable to connect the backup camera and rear view mirror monitor, with heavy duty weatherproof connectors!!!
    • English user manual for both Backup Camera and TFT LCD Monitor

 

 

 

_fcksavedurl=

_fcksavedurl=

Manufacturer Stock Photo

Camera Cable Connectors

16 Feet Standard Vedio Cable & 10 Feet Male Power Lead Plug

Camera Cable Connectors

Camera Cable Connectors

Front Panel Control with On-Screen Menu

Camera Cable Connectors

Universal Adjustable Mounting Clips to Attach Monitor to Existing Rear View Mirror in Seconds

rear view lcd back

Rear View Mirror Backup System Includes Accessories

 

Camera Cable Connectors

32' or 49' cable to connect the backup camera and rear view mirror monitor

 

 

 

License Camera Special Features

 

  • License Plate Mount Camera-mounts to existing license plate screws requiring no new holes!
  • Mount directly on top of the U.S. standard license plate (for U.S. st, no complicated installations
  • Water-proof without extra housing: for part (camera glass lens) exposed to outside ONLY and for normal usage ONLY. Camera body and cables are not designed to be exposed to outside and must be properly sealed against moisture. Incorrect installation and using the product in opposition to the manufacturer's instructions MAY result in loosing water-proof feature.
  • High resolution 420 TV lines
  • User adjust left/right mirror reverse image - can set to display a reversed camera image on the monitor (for vehicle rear viewing to duplicate the normal view seen in a rear-view mirror) OR a normal view on the monitor (for vehicle front viewing) - connect two-pin jumper connector to the mirror reverse wire to set for normal view
  • 120 Degree wide angle precision micro lens! - Essential to get a wide picture view especially when backing up a towed vehicle or a vehicle with wide turning radius!
  • Adjustable view, up to 45 degree tilt down 
  • High power, over launch infrared tubs - auto activate at night, 30 foot night vision!
  • Standard RCA video output - When in need of replacement cables you can simply buy them off the shelves of any store selling video cables.  There's no need to shop around for some "special type" of cable.  The connectors are compatible with this product as they would be with any VCR, DVD player, TV, or Monitor.
  • Uses standard 12V DC power supply found in most land vehicles

    Caution: The camera is designed to operate within a range of constantly changing voltage levels produced by a vehicle's battery and alternator (post engine ignition) under normal use conditions. Some vehicles have a very high momentary voltage at the vehicle starting time and the excessive voltage generation at that time might cause damage to the camera. If your vehicle tends to emit high voltage levels during ignition you will need to install a fuse/voltage regulator/etc. to protect your camera. Please consult with a professional vehicle audio/video equipment installers if needed.

License Camera Technical Specifications

CW134087CAI Rear View Camera Dimension
(Stock Photo Provided By Manufacturer)
Width = 9.8" x Height = 1.2" x Depth = 0.6" (with license-mount bracket attached)
Width = 2.5" x Height = 1.2" x Depth = 0.6" (Camera only)
 
Image Sensor 1/4" OV7950 CMD Video output <1.0V peak-to-peak, 75 Ohm
Effective Pixel 510 x 496 pixels Sensing Area 5.961mm x 4.276mm
Resolution 420 TV Line SNRMAX 48 dB
Wide View Angle 120° Image Reverse Left-right mirror
Scanning System 2:1 Interface Power Supply DC 12V+10%
Vurrent Consumption Under 150mA Waterproof Level IP67-IP68
Sync System Internal Electronic Shutter 1/60-1/15,000 seconds
TV System NTSC Weight Approx 2.5 ounce
AGC and BLC Auto Matic White Balance Auto
Operation Temperature -20°C to +75°C (RH 95% Max.) Storage Temperature -40°C to +85°C (RH 95% Max.)
Material Aluminum Alloy Cable Input/Output (2 Sockets) low Socket - DC Power Output, Red Socket - Vedio Output
Automatic IFP (image flow processor) Features Auto exposure, auto white balance (AWB), auto black reference (ABR), auto flicker avoidance, auto color saturation, and auto defect identification and correction Dimensions (see picture above) 63mm (w) x 30mm (h) x 15mm (d) (without license mount bracket) -> approx. 2.5" (w) x 1.2" (h) x 0.6" (d)
250mm (w) x 31mm (h) x 15mm (d) (with bracket and shield) -> approx. 9.8" (w) x 1.2" (h) x 0.6" (d)

Rear View Mirror Monitor Special Features

  • Has Both Front Panel On-Screen Menu and Wireless Remote Control
  • Fits most standard factory installed and after market rear view mirrors. Slot device simplifies installation and detachment
  • Special optical lens substitute the original Back-view Mirror
  • Standard RCA Video hookups
  • Automatically shift back-view system when reversing the car
  • Reverse Image Switch - Automatically wake up reversing back-view display, can be changed left, right up and down
  • Up to TWO cameras can be viewed (one camera is included)
  • 3.8" high resolution and super sharp digital screen within the rear view mirror!
  • Blue color background automatically appears when video signal disappears
  • Can be used as a normal Rear View Mirror when the Monitor is off
  • Universal adjustable mounting clips to attach the monitor over your existing rear view mirror in seconds!
  • Shock resistant, designed specifically for mobile use
  • Dimensions is  11.1" (w) x 3.25" (h) x 0.9" (d)

 

Rear View Mirror Monitor Technical Specifications

 

 
Display Screen 3.8" Color TFT Resolution 480(w)xRGBx234(h) pixels
Contrast 150:1 Dot Pitch 0.107 (h) x 0.319 (v)
TV System NTSC/PAL Auto Switch Power Supply DC 12V
Power Consumption 5 Watts MAX

Brightness

 300cd/m2
Video Two Way Dideo Input, Blue Screen When No Signal Display Function Auto Reversing Back-View Shift (Mirror)
Monitor Size w/ Rear View Mirror Frame  Approx. 11.1" (w) x 3.25" (h) x 0.9" (d)

Weight(monitor only)

Approx. 17.6 oz (12.7 ounces)
NOTE: Fits most standard and after market rear view mirrors.

 

Rear View Mirror Monitor Connection


CW134087CAI Rear View Camera Dimension

 

Product Code: MIRBWJT873

Customer Reviews

This product hasn't been reviewed yet. Write a review

 

Mobile Site