CCD COLOR WEATHER/WATER-PROOF WIDE VIEW SURFACE-MOUNT NIGHT VISION AVI REAR VIEW CAMERA
- One CCD COLOR A/V Weather/Water-Proof Wide Angle Vehicle Rear View Camera ( Model CW134087CAI, black color) With Wide View Angle and Night Vision. THE HIGHEST RESOLUTION CAMEREA IN THE MARKET 700TVL. Approx. 2.9" width x 2.4" height x 2.2" length (size includes surface-mount attachment).
- All the necessary cable hookups and Male Power Lead Plug to get your camera up and running.
Rear View Camera With Standard RCA Connector
|
|
(Stock Photo Provided By Manufacturer)
|
|
|
Rear View Camera With 4-Pin Connector
(Stock Photo Provided By Manufacturer)
|
|
Rear View Backup Camera Special Features
- Durable, rustproof stainless steel bodied camera and surface mount (comes with assembly materials to surface mount on outside of vehicle)
- Weather and Waterproof casing.
- 1/3" CCD image sensor
- 18 infrared tubes - auto activate at night - ability to sense low and high light levels and adjust image accordingly
- High resolution 700 TV lines
- Low illumination requirement - 0 LUX (w/LEDs on)
- User adjust left/right mirror reverse image - can set to display a reversed camera image on the monitor (for vehicle rear viewing to duplicate the normal view seen in a rear-view mirror) OR a normal view on the monitor (for vehicle front viewing) - use screw driver to adjust from the back of the camera
- 120 Degree Wide Angle View - Essential to get a wide picture view especially when backing up a towed vehicle or a vehicle with wide turning radius
- Standard RCA A/V Output OR Heavy Duty Water Resistant 4-Pin Connector - There's no need to shop around for some "special type" of cable. The connectors are compatible with this product as they would be with any VCR, DVD player, TV, or Monitor.
- Uses standard 12V DC power supply found in most land vehicles
- Caution: The camera is designed to operate within a range of constantly changing voltage levels produced by a vehicle's battery and alternator (post engine ignition) under normal use conditions. Some vehicles have a very high momentary voltage at the vehicle starting time and the excessive voltage generation at that time might cause damage to the camera. If your vehicle tends to emit high voltage levels during ignition you will need to install a fuse/voltage regulator/etc. to protect your camera. Please consult with a professional vehicle audio/video equipment installers if needed.
Model CW134087CI Technical Specifications
(Stock Photo Provided By Manufacturer)
Width = 2.9" x Height = 2.4" x Depth = 2.2" (with surface-mount bracket attached)
Width = 1.8" x Height = 1.7" x Depth = 2.2" (Camera only)
Image Sensor |
1/3" SHARP CCD Image Capturing Sensor |
Horizontal Resolution |
700 TV Lines |
Effective Pixels |
976(H) x 582(V) |
Minimum Illumination |
0 LUX (w/ LEDs on) / F:2.0 |
Sensing Area |
4.9mm x 3.7mm |
Sync System |
Internal |
Video Out Signal |
1.0 Vp-p 75 ohm |
Power Supply |
DC 12V (Standard on most land vehicles) |
AGC |
Auto |
S/N Ratio |
Better than 48dB |
Electronic Shutter |
1/60 - 1/10,000 second |
Weight |
Approx 13.4 oz (380 g) |
Infrared Distance |
15 feet (5 meters) |
Built-in Lens |
f=2.8mm / F=2.0 |
Audio Capability |
Yes (customized requirements) |
BLC |
Auto |
White Balance |
Auto |
TV System |
NTSC |
Operating Temperature |
-4°F - 158°F (-20°C - 70°C) / RH 95% Max |
Storage Temperature |
-40°F - 176°F (-40°C - 80°C) / RH 95% Max |
Current Consumption |
Max 300mA |
Lens Angel |
Wide View Angel 120° |
Dimensions (see picture above) |
Width = 75 mm x Heighth = 62 mm x Depth = 55 mm (with surface-mount bracket) approx. 2.9" x 2.4" x 2.2" (w/surface-mount bracket) approx. 1.8" x 1.7" x 2.2" (Camera only)
|
Cable Input/Output (3 Sockets or 4-Pin) |
3 Sockets: Yellow Socket - RCA Video Output, Red/White Socket - RCA Audio Output, Black/Red Socket - DC Power Input
4-Pin: Heavy Duty Weather Resistant, Audio/Video Ouput and DC Power Input |
Product Code: CW134087CAI