-
- One CCD COLOR 700TVL Weather/Water-Proof Wide Angle Vehicle Rear View Camera With Wide View Angle, Video, and Night Vision. Approx. 2.8" width x 3.0" height x 2.6" length (size includes surface-mount attachment).
- FREE BONUS!!! - 10 feet Male Power Lead Plug to get your camera up and running, and extended 16 feet standard vedio cable with vedio output socket.
- One (1) NEW Rear View Mirror 7" Diagonal Viewing Surface COLOR Monitor, Front Panel Controls With On-Screen Menu
- One (1) Wireless Remote Controller
- All the necessary cable hookups for monitor installation and right out-of-the-box use.
- ANOTHER FREE BONUS!!! - 32' or 49' cable to connect the backup camera and rear view mirror monitor, with heavy duty weatherproof connectors!!!
- English user manual for both CCD Camera and TFT LCD Monitor
|
|
16 Feet Standard Vedio Cable & 10 Feet Male Power Lead Plug
|
|
Front Panel Control with On-Screen Menu
|
Universal Adjustable Mounting Clips to Attach Monitor to Existing Rear View Mirror in Seconds
|
|
Rear View Mirror Backup System Includes Accessories
|
32' or 49' cable to connect the backup camera and rear view mirror monitor
|
|
Connection Diagram, Manufacturer Stock Photo
|
 
Clip-on the original mirror
Manufacturer Stock Photo
|
The CCD Camera Has The Following Special Features
- Durable, rustproof stainless steel bodied camera and surface mount (comes with assembly materials to surface mount on outside of vehicle)
- Two extra screw holes at two sides of the camera surface mount
- Weather and Waterproof casing with the rain shield. Please note: The casing is weather and waterproof under normal use only and doesn't require any further adjustment on your part. However, the cables may not be weather and waterproof. To make proofing enabled, the cable connections will require additional sealing/protection that you must provide. Remember, improper installation and using the product in opposition to the manufacturer's instructions and the manufacturer's defined terms and conditions of normal usage may result in damage to the weather/waterproofing properties of the camera.
- 1/3" CCD image sensor
- 18 infrared tubes - auto activate at night - ability to sense low and high light levels and adjust image accordingly
- High resolution 700 TV lines
- Low illumination requirement - 0.2 LUX (w/LEDs on)
- Reverse image - set to display a reversed camera image on the monitor by default(for vehicle rear viewing to duplicate the normal view seen in a rear-view mirror)
- 135 Degree Wide Angle View - Essential to get a wide picture view especially when backing up a towed vehicle or a vehicle with wide turning radius
- Standard RCA video output - When in need of replacement cables you can simply buy them off the shelves of any store selling video cables. There's no need to shop around for some "special type" of cable. The connectors are compatible with this product as they would be with any VCR, DVD player, TV, or Monitor.
- Uses standard 12V DC power supply found in most land vehicles
- Caution: The camera is designed to operate within a range of constantly changing voltage levels produced by a vehicle's battery and alternator (post engine ignition) under normal use conditions. Some vehicles have a very high momentary voltage at the vehicle starting time and the excessive voltage generation at that time might cause damage to the camera. If your vehicle tends to emit high voltage levels during ignition you will need to install a fuse/voltage regulator/etc. to protect your camera. Please consult with a professional vehicle audio/video equipment installers if needed.
CCD Camera Technical Specifications
(Stock Photo Provided By Manufacturer)Width = 2.9" x Height = 3.1" x Depth = 2.6" (with surface-mount bracket attached)
Width = 2.8" x Height = 1.7" x Depth = 2.0" (Camera only)
| Image Sensor |
1/3" SHARP CCD Sensor |
Video output |
<1.0V peak-to-peak, 75 Ohm |
| Effective Pixel |
976 x 582 pixels |
Sensing Area |
9.6mm x 6.34mm |
| Resolution |
700 TV Line |
SNRMAX |
48 dB |
| Wide View Angle |
120° |
Image Reverse |
Left-right mirror |
| Shutter |
1/60-1/15000 Seconds |
Power Supply |
DC 12V+10% |
| Power Consumption |
Under 300mA |
Waterproof Level |
IP67-IP68 |
| Sync System |
Internal |
S/N Ratio |
Better than 48dB |
| TV System |
NTSC |
Weight |
Approx 350 g |
| AGC and BLC |
Auto |
Matic White Balance |
Auto |
| Operation Temperature |
-20°C to +75°C (RH 95% Max.) |
Storage Temperature |
-40°C to +85°C (RH 95% Max.) |
| Material |
Aluminum Alloy |
Cable Input/Output (2 Sockets) |
low Socket - DC Power Output, Red Socket - Vedio Output |
| Automatic IFP (image flow processor) Features |
Auto exposure, auto white balance (AWB), auto black reference (ABR), auto flicker avoidance, auto color saturation, and auto defect identification and correction |
Dimensions (see picture above) |
72 mm (w) x 42 mm (h) x 52 mm (d) (without bracket or shield) -> approx. 2.8" (w) x 1.7" (h) x 2.0" (d)
75 mm (w) x 80 mm (h) x 65 mm (d) (with bracket and shield) -> approx. 2.9" (w) x 3.1" (h) x 2.6" (d) |
The TFT LCD Monitor Has The Following Special Features
- Has Both Front Panel On-Screen Menu and Wireless Remote Control
- Fits most standard factory installed and after market rear view mirrors. Slot device simplifies installation and detachment
- Special optical lens substitute the original Back-view Mirror
- Standard RCA Video hookups
- Automatically shift back-view system when reversing the car
- Reverse Image Switch - Automatically wake up reversing back-view display
- Up to TWO cameras can be viewed on the 7" wide screen monitor within the mirror!
- Blue color background automatically appears when video signal disappears
- Can be used as a normal Rear View Mirror when the Monitor is off
- Universal adjustable mounting clips to attach the monitor over your existing rear view mirror in seconds!
TFT LCD Monitor Technical Specifications
(Stock Photo Provided By Manufacturer)
Approx. 10.2" (w) x 4.2" (h)
Dimensions shown are approximate and for demonstration only, actual dimensions may be slightly different.
| Display Screen |
7" Color TFT |
Resolution |
234xRGBx480 pixels |
| Aspect Ratio |
16:9 |
Contract Ratio |
300:1 |
| TV System |
NTSC/PAL Auto Switch |
Power Supply |
DC 12V |
| Power Consumption |
7 Watts MAX |
Working Environment
|
-20°C - 65°C (-4°F - 149°F) |
| Definition |
1440(W) x 234(H) |
Display Function |
Auto Reversing Back-View Shift (Mirror) |
| Monitor Size w/ Rear View Mirror Frame |
Approx. 260mm x 106mm x 30mm
(10.2" x 4.2" x 1.2") |
Weight(monitor only)
|
Approx. 17.6 oz (1.1 pounds)
NOTE: Fits most standard and after market rear view mirrors.
Please confirm that yours is the right size prior to purchasing. Please ensure that the mirror can withstand the weight.
|
TFT LCD Monitor Connection
Product Code: CW134087CAI_DS738
