You'll Get A Complete Rear View Backup System With All Accessories
- One High Resolution CCD COLOR Video Camera With Infrared Night Vision, 120° Wide View and heavy duty weather resistant 4-pin connector
- One High Resolution 7" COLOR TFT-LCD Wide Screen Digital Video Monitor With built-in 12-24V input, Illuminated Controls, And Automatic & Manual Selection
- System Accessories include: Full Function Wireless Remote Control, Universal Adjustable Monitor Mounting Bracket, Optional Windshield Suction Mount, Video & Audio Input & Control Cable, and Main Power Cable; FREE BONUS 32 Feet Camera Connecting Extension Cable with 4-pin connectors. Notes: See the Accessories Pictures below!
- English User Manual & Quick Connection Instructions

|

|

(Stock Photo Provided By Manufacturer)
|

(Stock Photo Provided By Manufacturer)
|

System Function and Connection Diagram
|
System Accessories:

LCD Monitor Accessories

CCD Camera Accessories


Bonus 32 Feet Extended Cable With Weather Resistant 4-Pin Connectors
|
The CCD Camera Has The Following Special Features
- Durable, rustproof stainless steel bodied camera and surface mount (comes with assembly materials to surface mount on outside of vehicle)
- Weather and Waterproof casing with heavy duty weather/water resistant 4-pin connector.
- 1/3" CCD image sensor
- 18 infrared tubes - auto activate at night - ability to sense low and high light levels and adjust image accordingly
- High resolution 420 TV lines
- Low illumination requirement - 0 LUX (w/LEDs on)
- User adjust left/right mirror reverse image - can set to display a reversed camera image on the monitor (for vehicle rear viewing to duplicate the normal view seen in a rear-view mirror) OR a normal view on the monitor (for vehicle front viewing)
- 120 Degree Wide Angle View - Essential to get a wide picture view especially when backing up a towed vehicle or a vehicle with wide turning radius
- The camera video output with an additional 3 feet cable (RCA connector one side and 4-Pin connector the other side) is compatible with any VCR, DVD player, TV, or Monitor that have the standard video input.
- Uses standard 12V DC power supply found in most land vehicles
- Caution: The camera is designed to operate within a range of constantly changing voltage levels produced by a vehicle's battery and alternator (post engine ignition) under normal use conditions. Some vehicles have a very high momentary voltage at the vehicle starting time and the excessive voltage generation at that time might cause damage to the camera. If your vehicle tends to emit high voltage levels during ignition you will need to install a fuse/voltage regulator/etc. to protect your camera. Please consult with a professional vehicle audio/video equipment installers if needed.
CCD Camera Technical Specifications

(Stock Photo Provided By Manufacturer)
Image Sensor |
1/3" SHARP CCD Image Capturing Sensor |
Horizontal Resolution |
420 TV Lines |
Effective Pixels |
519(H) x 492(V) |
Minimum Illumination |
0 LUX (w/ LEDs on) / F:2.0 |
Sensing Area |
4.9mm x 3.7mm |
Sync System |
Internal |
Video Out Signal |
1.0 Vp-p 75 ohm |
Power Supply |
DC 12V (Standard on most land vehicles) |
AGC |
Auto |
S/N Ratio |
Better than 48dB |
Electronic Shutter |
1/60 - 1/10,000 second |
Weight |
Approx 13.4 oz (380 g) |
Infrared Distance |
15 feet (5 meters) |
Built-in Lens |
f=2.8mm / F=2.0 |
Audio Capability |
Yes |
BLC |
Auto |
White Balance |
Auto |
TV System |
NTSC |
Operating Temperature |
-4°F - 158°F (-20°C - 70°C) / RH 95% Max |
Storage Temperature |
-40°F - 176°F (-40°C - 80°C) / RH 95% Max |
Current Consumption |
Max 300mA |
Lens Angel |
Wide View Angel 120° |
Dimensions (see picture above) |
Width = 75 mm x Heighth = 62 mm x Depth = 55 mm (with surface-mount bracket) approx. 2.9" x 2.4" x 2.2" (w/surface-mount bracket) approx. 1.8" x 1.7" x 2.2" (Camera only)
|
Cable Input/Output (4-Pin) |
Video Output and DC Power Input |
The TFT LCD Monitor Has The Following Special Features
-
High Quality COLOR 7" TFT LCD monitor with wide screen and fine pictures.
-
Up to 2 AV inputs can work with up to 2 Auto Swtching Cameras
-
Super sharp picture with 1440 (h) x 234 (v) resolution
-
Front panel controls with on-screen menu
-
All functions are controlled by wireless remote control, OSD menu
-
Screen tilts up/down for more versatile viewing options
-
Monitor viewing angle 15°(Up), 35°(Down), 55°(Left/Right)
-
Automatic image switch to right or left
-
Includes universal adjustable monitor mounting bracket, also optional windshield suction mount; Monitor can be mounted almost anywhere such as the dashboard, sun visor, center console, windshield, hung from the ceiling, etc
-
Shock resistant, designed specifically for mobile use
-
4:3 and 16:9 aspect ratio selectable from monitor
-
Automatic brightness control function, Illuminated control buttons light automatically during darkness
-
7 Languages OSD display
-
Built-in 12-24V input
-
OSD Languages display: English/Chinese
-
NTSC/PAL auto switching
TFT LCD Monitor Technical Specifications
Display Screen |
7" Color TFT |
Video Output |
V1/V2 |
System |
PAL & NTSC Auto Switching |
Resolution |
480 R.G.B x234 Dots |
Power Supply |
DC 12-24V |
Power Consumption |
About 7W |
LCD Profile Ratio |
16:9 |
Image Brightness/Color/Contrast
|
Adjustable |
Viewing Angle |
U: 40 / D: 60, L/R: 60 |
Response Time(ms) |
R:10/F:20 |
Response Time(ms) |
R:10/F:20 |
Picture Fliping Function |
Up/Down,Left/Right:Manual |
Operation Temperature |
0-50°C |
Outer Dimensions
|
7.2" (w) x 5" (h) x 1.5" (d)
|
Product Code: JV-M70_CW087