7" DIGITAL PANEL HIGHT RESOLUTION 1204(W) X RGB X 600(H) FLAT SCREEN COLOR REVERSING LCD MONITOR TWO AV CHANNELS & 120° CCD COLOR HIGH RESOLUTION 700TV LINE REAR VIEW BACKUP CAMERA!!!
The Rear View Backup System Package Includes Items Below
- One High Resolution 700TV LINE CCD COLOR Video Camera With Infrared Night Vision And 120° Wide View
- One High Resolution 1024 x 600 Digital 7" COLOR Reversing TFT-LCD Monitor With Headrest Shroud and Stand, Built-In Speaker, Illuminated Controls, and Automatic & Manual Selection
- System Accessories include: Full Function Wireless Remote Control, Headrest Shroud and Stand Bracket, 4-Pin Screw AV Cable, Switching Cable, Mounting Screws; FREE BONUS 32 Feet Camera Connecting Extension Cable With Heavy Duty Weather Resistant 4-pin Connectors (See the Accessories Pictures below)
- English User Manual & Quick Connection Instructions

|

|

(Stock Photo Provided By Manufacturer)
|

(Stock Photo Provided By Manufacturer)
|








|
System Accessories:

LCD Monitor Accessories


Bonus 32 Feet Extended Cable With Weather Resistant 4-Pin Connectors
|
The CCD Camera Has The Following Special Features
- Durable, rustproof stainless steel bodied camera and surface mount (comes with assembly materials to surface mount on outside of vehicle)
- Weather and Waterproof casing with heavy duty weather/water resistant 4-pin connector.
- 1/3" CCD image sensor
- 18 infrared tubes - auto activate at night - ability to sense low and high light levels and adjust image accordingly
- High resolution 420 TV lines
- Low illumination requirement - 0 LUX (w/LEDs on)
- User adjust left/right mirror reverse image - can set to display a reversed camera image on the monitor (for vehicle rear viewing to duplicate the normal view seen in a rear-view mirror) OR a normal view on the monitor (for vehicle front viewing)
- 120 Degree Wide Angle View - Essential to get a wide picture view especially when backing up a towed vehicle or a vehicle with wide turning radius
- The camera video output with an additional 3 feet cable (RCA connector one side and 4-Pin connector the other side) is compatible with any VCR, DVD player, TV, or Monitor that have the standard video input.
- Uses standard 12V DC power supply found in most land vehicles
- Caution: The camera is designed to operate within a range of constantly changing voltage levels produced by a vehicle's battery and alternator (post engine ignition) under normal use conditions. Some vehicles have a very high momentary voltage at the vehicle starting time and the excessive voltage generation at that time might cause damage to the camera. If your vehicle tends to emit high voltage levels during ignition you will need to install a fuse/voltage regulator/etc. to protect your camera. Please consult with a professional vehicle audio/video equipment installers if needed.
CCD Camera Technical Specifications

(Stock Photo Provided By Manufacturer)
Image Sensor |
1/3" SHARP CCD Sensor |
Video output |
<1.0V peak-to-peak, 75 Ohm |
Effective Pixel |
512 x 492 pixels |
Sensing Area |
9.6mm x 6.34mm |
Resolution |
700 TV Line |
SNRMAX |
48 dB |
Wide View Angle |
120° |
Image Reverse |
Left-right mirror |
Shutter |
1/60-1/15000 Seconds |
Power Supply |
DC 12V+10% |
Power Consumption |
Under 300mA |
Waterproof Level |
IP67-IP68 |
Sync System |
Internal |
S/N Ratio |
Better than 48dB |
TV System |
NTSC |
Weight |
Approx 350 g |
AGC and BLC |
Auto |
Matic White Balance |
Auto |
Operation Temperature |
-20°C to +75°C (RH 95% Max.) |
Storage Temperature |
-40°C to +85°C (RH 95% Max.) |
Material |
Aluminum Alloy |
Cable Input/Output (2 Sockets) |
low Socket - DC Power Output, Red Socket - Vedio Output |
Automatic IFP (image flow processor) Features |
Auto exposure, auto white balance (AWB), auto black reference (ABR), auto flicker avoidance, auto color saturation, and auto defect identification and correction |
Dimensions (see picture above) |
72 mm (w) x 42 mm (h) x 52 mm (d) (Camera Only) -> approx. 2.8" (w) x 1.7" (h) x 2.0" (d)
75 mm (w) x 80 mm (h) x 65 mm (d) (with bracket and shield) -> approx. 2.9" (w) x 3.1" (h) x 2.6" (d) |
The TFT LCD Monitor Has The Following Special Features
-
High Quality 7" TFT LCD reversing monitor with wide screen and sun visor
-
Digital panel with super sharp picture with 1024 (W) x RGB x 600 (H) high resolution
-
Made from ABS resisting high temperature and blast; Shock resistant (8G); designed specifically for mobile use
-
Connect to up to two cameras: while CAM1/CAM2 is in operation, power of CAM2/CAM1 will be cut off automatically; effectively prolongs the life of the cameras and saves the car power
-
Compulsory signal switch: Images from CAM1 or CAM2 is activated automatically when backing up the car or opening the door of the car
-
View angle Up 50 degree, Down 70 degree, Left/Right 70 degree
-
Normal/mirror image setup
-
Full-function wireless remote controller
-
8 languages OSD
-
Includes Headrest Shroud and Stand mounting bracket
-
Wide range of power supply: 12V~24V
-
One FREE 32 feet camera connecting extension cable with Aircraft Grade Stainless Steel Weather Resistant 4-pin Connector - BONUS!!!
- Auto activate on reverse signal (reversing back-view display)
TFT LCD Monitor Technical Specifications
Display Screen |
7" Color TFT |
TV System |
NTSC |
Show Format |
16:9 |
Video Inputs |
V1, V2 automatic conversion |
Power Supply |
DC 12V-24V |
Power Consumption |
5W Max |
Resolution |
1024(W) x RGB x 600(H) |
Contrast |
300:1 |
Weight |
10 ounce |
Dimension |
7.0" (W) x 4.6" (H) x 0.9" (D) w/o Headrest Bracket |
Product Code: TM7007_700TVLCAM