Change Currency: USD



Product Information


The LCD Monitor Has Automatic Brightness Control Function, Also Works With Our Many Other Addtional Rear View Cameras! Up To 4 AV Inputs, Three Cameras Inputs On The Rear And One A/V Input On The Front Panel!

Added Bonus!!! - Free 32' Cable (MSRP's for $30) to connect the monitor to the camera.  Depending upon your needs we also sell a longer 49' cable at additional $10 


You'll Get A Complete Rear View Backup System With All Accessories 

  • One High Resolution CCD COLOR Video Camera With Infrared Night Vision And 120° Wide View
  • One High Resolution 7" COLOR  Reversing TFT-LCD Monitor With Sun Visor, Built-In Speaker, Illuminated Controls, And Automatic & Manual Selection
  • System Accessories include: Full Function Wireless Remote Control, U-Shape Mounting Bracket, 4-Pin Screw AV Cable, Switching Cable, Cigarette Lighter Adapter, Mounting Screws; FREE BONUS 32 Feet Camera Connecting Extension Cable With Heavy Duty Weather Resistant 4-pin Connectors; FREE BONUS Male Power Lead Plug. Notes: See the Accessories Pictures below!
  • English User Manual & Quick Connection Instructions


Camera Cable Connectors


Camera Cable Connectors

(Stock Photo Provided By Manufacturer)

Camera Cable Connectors

(Stock Photo Provided By Manufacturer)

Camera Cable Connectors

(Stock Photo Provided By Manufacturer)

System Accessories:


LCD Monitor Accessories

Camera Accessories

32' Cable With Heavy Duty Weather Resistant 4-pin Connectors







The CCD Camera Has The Following Special Features

  • Durable, rustproof stainless steel bodied camera and surface mount (comes with assembly materials to surface mount on outside of vehicle)
  • Weather and Waterproof casing.  Please note: The casing is weather and waterproof under normal use only and doesn't require any further adjustment on your part.  However, the cables may not be weather and waterproof.  To make proofing enabled, the cable connections will require additional sealing/protection that you must provide.  Remember, improper installation and using the product in opposition to the manufacturer's instructions and the manufacturer's defined terms and conditions of normal usage may result in damage to the weather/waterproofing properties of the camera.
  • 1/3" CCD image sensor  
  • 18 infrared tubes - auto activate at night - ability to sense low and high light levels and adjust image accordingly 
  • High resolution 420 TV lines
  • Low illumination requirement - 0 LUX (w/LEDs on)
  • User adjust left/right mirror reverse image - can set to display a reversed camera image on the monitor (for vehicle rear viewing to duplicate the normal view seen in a rear-view mirror) OR a normal view on the monitor (for vehicle front viewing)
  • Audio capable for listening to external sounds.
  • 120 Degree Wide Angle View - Essential to get a wide picture view especially when backing up a towed vehicle or a vehicle with wide turning radius
  • Standard RCA audio/video output - When in need of replacement cables you can simply buy them off the shelves of any store selling audio/video cables.  There's no need to shop around for some "special type" of cable.  The connectors are compatible with this product as they would be with any VCR, DVD player, TV, or Monitor.
  • Uses standard 12V DC power supply found in most land vehicles
  • Caution: The camera is designed to operate within a range of constantly changing voltage levels produced by a vehicle's battery and alternator (post engine ignition) under normal use conditions. Some vehicles have a very high momentary voltage at the vehicle starting time and the excessive voltage generation at that time might cause damage to the camera. If your vehicle tends to emit high voltage levels during ignition you will need to install a fuse/voltage regulator/etc. to protect your camera. Please consult with a professional vehicle audio/video equipment installers if needed.

CCD Camera Technical Specifications 

CW134087CAI Rear View Camera Dimension
(Stock Photo Provided By Manufacturer)


Image Sensor 1/3" SHARP CCD Image Capturing Sensor Horizontal Resolution 420 TV Lines
Effective Pixels 519(H) x 492(V) Minimum Illumination 0 LUX (w/ LEDs on) / F:2.0
Sensing Area
4.9mm x 3.7mm
Sync System Internal
Video Out Signal 1.0 Vp-p 75 ohm Power Supply DC 12V (Standard on most land vehicles)
AGC Auto
S/N Ratio Better than 48dB
Electronic Shutter
1/60 - 1/10,000 second
Approx 13.4 oz (380 g)
Infrared Distance 15 feet (5 meters)
Built-in Lens f=2.8mm / F=2.0
Audio Capability
BLC Auto
White Balance
TV System NTSC
Operating Temperature
-4°F - 158°F (-20°C - 70°C) / RH 95% Max Storage Temperature -40°F - 176°F (-40°C - 80°C) / RH 95% Max
Current Consumption
Max 300mA
Lens Angel Wide View Angel 120°
Dimensions (see picture above)

Width = 75 mm x Heighth = 62 mm x Depth = 55 mm (with surface-mount bracket) approx. 2.9" x 2.4" x 2.2" (w/surface-mount bracket) approx. 1.8" x 1.7" x 2.2" (Camera only)

Cable Input/Output (3 Sockets)
Yellow Socket - RCA Video Output, Red/White Socket - RCA Audio Output, Black/Red Socket - DC Power Input


The TFT LCD Monitor Has The Following Special Features

  • High Quality 7" TFT LCD reversing monitor with wide screen and sun visor
  • Made from ABS resisting high tempreature and blast; Shock resistant (8G); designed specifically for mobile use
  • Super sharp picture with 1440 (h) x 234 (v) resolution
  • Connect to up to two cameras: while CAM1/CAM2 is in operation, power of CAM2/CAM1 will be cut off automatically; effectively prolongs the life of the cameras and saves the car power  
  • Compulsory signal switch: Images from CAM1 or CAM2 is activated automatically when backing up the car or opening the door of the car
  • Automatic LED indicator activation at night so that users can see the key of the monitor clearly in the dark 
  • Blue light indicates startup; red light indicates sleeping mode
  • With three video input, set up the priority of reverse camera
  • Normal/mirror image setup 
  • Full-function wireless remote controller
  • Built-in loud audio speaker
  • Jacks of AV Input and Output
  • Earphone output jack
  • Includes supports flat surface mount and U-Shape mounting bracket
  • Wide range of power supply: 12~32V
  • One FREE 32 feet camera connecting extension cable included - BONUS!!!
  • Auto activate on reverse signal (reversing back-view display)

TFT LCD Monitor Technical Specifications


Display Screen 7" Color TFT Audio output 1W
Loudspeaker 4.5cm Loudspeaker Connecting Terminal Earphone Jack,Audio/Video(AV) Input Jack,External Power Supply Input Jack,Camera Connector
Power Supply Automobile Storage Battery(12-32V), Automobile Adapter Power Consumption DC11~32V, 5W Max
Resolution 1440(H) x 234(V)


Doct Pitch 0.321(H) x 0.370(V) Responding Time Less than 2 seconds when reversing
Contrast 500:1 Brightness 300cd/m²
Viewing Angle U: 45 / D: 65, R/L: 65

External Dimensions

180mm(W) x 118mm(H) x 23mm(T)

Operating Temperature -20~+70°C, RH90% Storage Temperature -30~+80°C, RH90%


System Function And Connection Diagram



(Stock Photo Provided By Manufacturer)

(Stock Photo Provided By Manufacturer)

(Stock Photo Provided By Manufacturer)

(Stock Photo Provided By Manufacturer)

(Stock Photo Provided By Manufacturer)


Product Code: 717CW087

Customer Reviews

This product hasn't been reviewed yet. Write a review


Mobile Site