BRAND NEW VEHICLE REAR VIEW BACKUP SYSTEM - COLOR LICENSE MOUNT INFRARED CAMERA WITH 4.3" HIGH SOLUTION LCD REAR VIEW MIRROR MOUNT MONITOR!!!The TFT LCD Rear View Mirror Monitor Has Super Clear Rear View Mirror View and High Resolution LCD Monitor View! Up to Two Cameras Can Be Viewed On The 4.3" Screen Monitor Within The Mirror! Also Works With Our Many Other Addtional Rear View Cameras!
Added Bonus!!!
Free 20' Video Cable to connect the monitor to the camera. Normally sold separately, this MSRP's for $30. You don't have to shop elsewhere!!! We're giving it to you for free as thanks for purchasing the camera/monitor set. Depending upon your needs we also provide 32 ' RCA cable at additional $8 or 49' RCA cable at additional $15
You'll Get A Complete Rear View Backup System With All Accessories
|
Manufacturer Stock Photo
|
16 Feet Standard Vedio Cable & 10 Feet Male Power Lead Plug
|
|
|
Universal Adjustable Mounting Clips to Attach Monitor to Existing Rear View Mirror in Seconds
|
|
Rear View Mirror Backup System Includes Accessories
|
 
Clip-on the original mirror
Manufacture Stock Photo
|
Camera Special Features
- COLOR License Mount Rear View Camera With Wide VLicense Plate Mount Camera-mounts to existing license plate screws requiring no new holes!
- Mount directly on top of the U.S. standard license plate (for U.S. st, no complicated installations
- Water-proof without extra housing: for part (camera glass lens) exposed to outside ONLY and for normal usage ONLY. Camera body and cables are not designed to be exposed to outside and must be properly sealed against moisture. Incorrect installation and using the product in opposition to the manufacturer's instructions MAY result in loosing water-proof feature.
- High resolution 420 TV lines
- User adjust left/right mirror reverse image - can set to display a reversed camera image on the monitor (for vehicle rear viewing to duplicate the normal view seen in a rear-view mirror) OR a normal view on the monitor (for vehicle front viewing) - connect two-pin jumper connector to the mirror reverse wire to set for normal view
- 120 Degree wide angle precision micro lens! - Essential to get a wide picture view especially when backing up a towed vehicle or a vehicle with wide turning radius!
- Adjustable view, up to 45 degree tilt down
- High power, over launch infrared tubs - auto activate at night, 30 foot night vision!
- Standard RCA video output - When in need of replacement cables you can simply buy them off the shelves of any store selling video cables. There's no need to shop around for some "special type" of cable. The connectors are compatible with this product as they would be with any VCR, DVD player, TV, or Monitor.
- Uses standard 12V DC power supply found in most land vehicles
Caution: The camera is designed to operate within a range of constantly changing voltage levels produced by a vehicle's battery and alternator (post engine ignition) under normal use conditions. Some vehicles have a very high momentary voltage at the vehicle starting time and the excessive voltage generation at that time might cause damage to the camera. If your vehicle tends to emit high voltage levels during ignition you will need to install a fuse/voltage regulator/etc. to protect your camera. Please consult with a professional vehicle audio/video equipment installers if needed.
Camera Technical Specifications
(Stock Photo Provided By Manufacturer)Width = 9.8" x Height = 1.2" x Depth = 0.6" (with license-mount bracket attached)
Width = 2.5" x Height = 1.2" x Depth = 0.6" (Camera only)
|
Image Sensor
|
1/4" OV7950 CMD
|
Video output
|
<1.0V peak-to-peak, 75 Ohm
|
|
Effective Pixel
|
510 x 496 pixels
|
Sensing Area
|
5.961mm x 4.276mm
|
|
Resolution
|
420 TV Line
|
SNRMAX
|
48 dB
|
|
Wide View Angle
|
120°
|
Image Reverse
|
Left-right mirror
|
|
Scanning System
|
2:1 Interface
|
Power Supply
|
DC 12V+10%
|
|
Vurrent Consumption
|
Under 150mA
|
Waterproof Level
|
IP67-IP68
|
|
Sync System
|
Internal
|
Electronic Shutter
|
1/60-1/15,000 seconds
|
|
TV System
|
NTSC
|
Weight
|
Approx 2.5 ounce
|
|
AGC and BLC
|
Auto
|
Matic White Balance
|
Auto
|
|
Operation Temperature
|
-20°C to +75°C (RH 95% Max.)
|
Storage Temperature
|
-40°C to +85°C (RH 95% Max.)
|
|
Material
|
Aluminum Alloy
|
Cable Input/Output (2 Sockets)
|
low Socket - DC Power Output, Red Socket - Vedio Output
|
|
Automatic IFP (image flow processor) Features
|
Auto exposure, auto white balance (AWB), auto black reference (ABR), auto flicker avoidance, auto color saturation, and auto defect identification and correction
|
Dimensions (see picture above)
|
63mm (w) x 30mm (h) x 15mm (d) (without license mount bracket) -> approx. 2.5" (w) x 1.2" (h) x 0.6" (d)
250mm (w) x 31mm (h) x 15mm (d) (with bracket and shield) -> approx. 9.8" (w) x 1.2" (h) x 0.6" (d)
|
You'll Get A TFT LCD Rear View Mirror Monitor Special Features
- Fits most standard factory installed and after market rear view mirrors. Slot device simplifies installation and detachment
- Can be used as a normal Rear View Mirror when the Monitor is off, the view is super bright and clear
- Special optical lens substitute the original Back-view Mirror
- Can be connected to up to two Video inputs
- Standard RCA Video hookups
- Automatically shift back-view system when reversing the car
- Reverse Image Switch - Automatically wake up reversing back-view display
- Blue color background automatically appears when video signal disappears
- Universal adjustable mounting clips to attach the monitor over your existing rear view mirror in seconds!
TFT LCD Monitor Technical Specifications
|
Display Screen
|
4.3" Color LCD Digital
|
Resolution
|
640xRGBx480 pixels
|
|
Power Supply
|
DC 7V-12V
|
Contract Ratio
|
350:1
|
|
TV System
|
NTSC/PAL Auto Switch
|
Working Environment
|
-20°C - 70°C (-4°F - 158°F)
|
|
Power Consumption
|
<=1.5W
|
Video Inputs
|
Two video inputs AV1 and AV2
|
|
Brightness
|
300CD/m2
|
Display Function
|
Auto Reversing Back-View Shift (Mirror)
|
|
Monitor Size w/ Rear View Mirror Frame
|
Approx. 286mm x 76mm x 35mm
(11.3" x 3.0" x 1.4")
|
Weight(monitor only)
|
Approx. 8 ounces
NOTE: Fits most standard and after market rear view mirrors.
|
Product Code: HT4.3D_1065
